Current Store:  

Currency
CAD
MIDI Pipe Driver w/104 Negative outputs
MIDI Pipe Driver w/104 Negative outputs
Brand: Classic MIDI Works
Product Code: 11-MID-IOUT-N
Availability: In Stock
Price: USD499.00
Qty:     - OR -   Add to Wish List
Add to Compare

Description

The MIDIOUT Driver Board turns its output pins on or off based on MIDI input data.

This board is available in two versions, each with 104 outputs. The MIDIOUT-P has positive outputs for driving active-high (negative common) relays and pipe chest magnets. Conversely, the MIDIOUT-N has negative outputs for active-low (positive-common) relays and pipe chest magnets.

A convenient built-in MIDI-merge feature allows several MIDIOUT boards and MIDI devices to be cascaded.

The MIDIOUT board has a user selectable DIP-Switch setting to control the output pins via MIDI channel(s). Depending on the mode of operation, users can select whether to use one or two MIDI channels. In the first mode, all outputs are controlled using one MIDI channel. When the user selects the second mode, the board is divided into two halves. Thus, 52 output pins are controlled by the MIDI channel specified, while the other 52 outputs react to MIDI messages on a MIDI channel that is one higher than the specified channel.

Features

  1. Available in two versions: Positive drive and Negative drive.
  2. 104 outputs can drive relays, motors, solenoids, LEDs, and incandescent lamps.
  3. DIP-Switch allows user to select output MIDI Channel (1-16).
  4. Capability to receive on one MIDI channel (104 outputs) or two MIDI Channels (52 outputs each).
  5. MIDI-merge feature to allow cascading several MIDIOUT boards.
  6. Two built-in diagnostic LEDs.
  7. Can be computer controlled via MIDI.
  8. Additional ‘Output Fault’ LED present on the MIDIOUT-P board.

Applications

The MIDI Driver Board can be used by organ-builders as well as hobbyists requiring controllers via MIDI. Organ-builders typically use the Classic MIDI Driver Board as a pipe driver to allow connection of wind-blown pipes to an electronic organ. Thus, a rank of pipes may be added to an organ with MIDI outputs. In addition, pipes may be played using MIDI from a computer. MIDI information received on the MIDI IN connector is transmitted on the MIDI OUT connector thus, multiple boards may be chained together to add extra pipes, LEDs, and incandescent lamps.

The MIDIOUT boards are not limited to pipe-organ applications. For example, in model railroad systems, these boards can be used to drive motors, solenoids, LEDs, and incandescent lamps, etc. Almost any computer-controlled MIDI switching system can benefit from the use of a MIDI Driver board.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



CONTACTS

2800 John Street, Unit 4

Markham, Ontario

Canada, L3R 0E2

 

+1 (888) 812 9717

midiworks@organworks.com

NEWSLETTER

Subscribe